Astrobotic CubeRover Testing (KSC-20201210-PH-KLS01 0129).jpg

Original file (6,720 × 4,480 pixels, file size: 23.32 MB, MIME type: image/jpeg)

This file is from Wikimedia Commons and may be used by other projects. The description on its file description page there is shown below.

Summary

Description

English: Astrobotic employees Troy Arbuckle, at far left, Planetary Mobility lead mechanical engineer; Takuto Oikawa, mechanical engineer; and Taylor Whitaker, flight software engineer, monitor the progress of the Astrobotic CubeRover during its test run in the Granular Mechanics and Regolith Operations Lab regolith at NASA’s Kennedy Space Center in Florida on Dec. 10, 2020. The regolith bin simulates the mechanical properties of the Moon’s surface. NASA and Astrobotic employees put the CubeRover through a series of more than 150 mobility tests over several days to evaluate and improve wheel design.

Date

Taken on 10 December 2020

Source

This image or video was catalogued by Kennedy Space Center of the United States National Aeronautics and Space Administration (NASA) under Photo ID: KSC-20201210-PH-KLS01_0129.

This tag does not indicate the copyright status of the attached work. A normal copyright tag is still required. See Commons:Licensing.

Other languages:

Afrikaans ∙ العربية ∙ беларуская (тарашкевіца) ∙ български ∙ Bahaso Jambi ∙ català ∙ čeština ∙ dansk ∙ Deutsch ∙ English ∙ español ∙ فارسی ∙ français ∙ galego ∙ magyar ∙ հայերեն ∙ Bahasa Indonesia ∙ italiano ∙ 日本語 ∙ македонски ∙ മലയാളം ∙ Nederlands ∙ polski ∙ português ∙ русский ∙ sicilianu ∙ slovenščina ∙ Türkçe ∙ українська ∙ 简体中文 ∙ 繁體中文 ∙ +/−

Author

NASA Kennedy Space Center / NASA/Kim Shiflett

Keywords

regolith; Kennedy Space Center; mobility testing; Moon; NASA; space exploration; space tech; lunar payload; Small Business Innovation Research; Astrobotic; CubeRover; KSC; robots; rover; SBIR

Licensing

	This file is in the public domain in the United States because it was solely created by NASA. NASA copyright policy states that "NASA material is not protected by copyright unless noted". (See Template:PD-USGov, NASA copyright policy page or JPL Image Use Policy.)
	Warnings: Use of NASA logos, insignia and emblems is restricted per U.S. law 14 CFR 1221. The NASA website hosts a large number of images from the Soviet/Russian space agency, and other non-American space agencies. These are not necessarily in the public domain. Materials based on Hubble Space Telescope data may be copyrighted if they are not explicitly produced by the STScI.[1] See also {{PD-Hubble}} and {{Cc-Hubble}}. The SOHO (ESA & NASA) joint project implies that all materials created by its probe are copyrighted and require permission for commercial non-educational use. [2] Images featured on the Astronomy Picture of the Day (APOD) web site may be copyrighted. [3] The National Space Science Data Center (NSSDC) site has been known to host copyrighted content. Its photo gallery FAQ states that all of the images in the photo gallery are in the public domain "Unless otherwise noted."

File history

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	22:58, 15 October 2024		6,720 × 4,480 (23.32 MB)	wikimediacommons>OptimusPrimeBot	#Spacemedia - Upload of http://images-assets.nasa.gov/image/KSC-20201210-PH-KLS01_0129/KSC-20201210-PH-KLS01_0129~orig.jpg via Commons:Spacemedia

File usage

There are no pages that use this file.

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitise it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	Canon
Camera model	Canon EOS 5D Mark IV
Author	NASA/Kim Shiflett
Copyright holder	For copyright and restrictions, refer to http://www.nasa.gov/multimedia/guidelines/index.html
Exposure time	1/125 sec (0.008)
F Number	f/4
ISO speed rating	2,500
Date and time of data generation	11:45, 10 December 2020
Lens focal length	24 mm
Label	Approved
Headline	AFS-8/101
Credit/Provider	NASA/Kim Shiflett
Source	Digital Still Image
Short title	Astrobotic CubeRover Testing
Image title	Astrobotic employees Troy Arbuckle, at far left, Planetary Mobility lead mechanical engineer; Takuto Oikawa, mechanical engineer; and Taylor Whitaker, flight software engineer, monitor the progress of the Astrobotic CubeRover during its test run in the Granular Mechanics and Regolith Operations Lab regolith at NASA’s Kennedy Space Center in Florida on Dec. 10, 2020. The regolith bin simulates the mechanical properties of the Moon’s surface. NASA and Astrobotic employees put the CubeRover through a series of more than 150 mobility tests over several days to evaluate and improve wheel design.
Usage terms	PAO Approved For Release
City shown	KSC
Orientation	Normal
Horizontal resolution	240 dpi
Vertical resolution	240 dpi
Software used	Adobe Photoshop Lightroom Classic 10.1 (Windows)
File change date and time	14:13, 11 December 2020
Exposure Program	Manual
Exif version	2.31
Date and time of digitising	11:45, 10 December 2020
APEX shutter speed	6.965784
APEX aperture	4
APEX exposure bias	0
Maximum land aperture	3 APEX (f/2.83)
Metering mode	Pattern
Flash	Flash did not fire, compulsory flash suppression
DateTimeOriginal subseconds	19
DateTimeDigitised subseconds	19
Colour space	sRGB
Focal plane X resolution	1,866.6666564941
Focal plane Y resolution	1,866.6666564941
Focal plane resolution unit	3
Custom image processing	Normal process
Exposure mode	Manual exposure
White balance	Auto white balance
Scene capture type	Standard
Serial number of camera	032022002389
Lens used	EF24-70mm f/2.8L II USM
Date metadata was last modified	05:37, 17 December 2020
Special instructions	12/10/2027
Unique ID of original document	F6BB7E6679E3635E1C8A657B090E1068
Keywords	Astrobotic CubeRover KSC Kennedy Space Center Moon NASA SBIR Small Business Innovation Research lunar payload mobility testing regolith robots rover space exploration space tech
Sublocation of city shown	Swamp Works
IIM version	4

File

Astrobotic CubeRover Testing (KSC-20201210-PH-KLS01 0129).jpg

From Spacefaring

Summary

Licensing

Captions

Items portrayed in this file

image/jpeg

4,480 pixel

6,720 pixel

24,457,612 byte

93d98b7a0cc7f55c30ea48edd2f2d9ef811b3efb

10 December 2020

10 December 2020

5jna3nz3gyq301infheajq85jgv00rvwm2n6m36juzcyjzmbrn

0.008 second

4

2,500

24 millimetre

File history

File usage

Metadata