Q1093806

rocket engine used on the Saturn I and IB. 

OverviewRelatedWikipediaGalleryTableS1S2S3

Wikimedia, Wikidata
rocket engine, United States of America, 

• Freebase entry^@
  

rocket engine – Saturn IB – 

Frameless

Alignment of the H-1 engine performed in the Army Ballistic Missile Agency (ABMA ), building 4708, in February 1960. A cluster of eight H-1 engines were used to thrust the first stage of the Saturn I launch vehicle.

A Cluster of eight H-1 engines were used to thrust the first stage of Saturn I (S-I stage) and Saturn IB (S-IB stage). The engines were arranged in a double pattern.

A H-1 Rocketdyne engine in exhibition in the Arkansas Air & Military Museum

A close-up image of the single H-1 engine was test-fired at Canoga Park, California. Initial development of testing for the H-1 engine took place in the engineering facilities at Rocketdyne's main plant in Canoga Park, California.

H1 Rocket Engine

H-1 Engine major components with callouts (chart 1): The H-1 engine was used in a cluster of eight on the the first stage of Saturn I (S-I stage) and Saturn IB (S-IB stage).

H-1 Rocket Engine

H-1 engine characteristics: The H-1 engine was developed under the management of the Marshall Space Flight Center (MSFC).

H-1 engine major components with callouts (chart 1). The H-1 engine was used in a cluster of eight on the the first stage of Saturn I (S-I stage) and Saturn IB (S-IB stage).

H-1 rocket engine

H-1 rocket engine diagram

H-1 rocket engine diagram image

H-1 turbopump

H-1 turbopump 3

Inside H-1 engine

In this photograph, the single H-1 engine was test-fired at Canoga Park, California. Initial development of testing for the H-1 engine took place in the engineering facilities at Rocketdyne's main plant in Canoga Park, California.

Moteur-H1-Saturn-I-P1010677

Outside H-1 engine

Propulsion and Structural Test Facility

Saturn I test article

S-I rocket stage

The H-1 engines for the Saturn I vehicle in the alignment fixture. A cluster of eight H-1 engines were used to thrust the first stage of the Saturn I launch vehicle.

This image depicts a firing of a single H-1 engine at the Marshall Space Flight Center’s (MSFC’s) Power Plant test stand.

Workers at the Michoud Assembly Facility near New Orleans, Louisiana install the H-1 engines into the S-IB stage, the Saturn IB launch vehicle's first stage.

Workers at the Michoud Assembly Facility (MAF) near New Orleans, Louisiana, install the last engine on the S-IB stage.

Type	Date	Description	Keywords	Notes	Source
link		Freebase entry@			Wikidata
image	1960	Alignment of the H-1 engine performed in the Army Ballistic Missile Agency (ABMA ), building 4708, in February 1960. A cluster of eight H-1 engines were used to thrust the first stage of the Saturn I launch vehicle.			Wikimedia
image	1960	A Cluster of eight H-1 engines were used to thrust the first stage of Saturn I (S-I stage) and Saturn IB (S-IB stage). The engines were arranged in a double pattern.			Wikimedia
image		A H-1 Rocketdyne engine in exhibition in the Arkansas Air & Military Museum			Wikimedia
image	1963	A close-up image of the single H-1 engine was test-fired at Canoga Park, California. Initial development of testing for the H-1 engine took place in the engineering facilities at Rocketdyne's main plant in Canoga Park, California.			Wikimedia
image	2012	H1 Rocket Engine			Wikimedia
image	2004	H-1 Engine major components with callouts (chart 1): The H-1 engine was used in a cluster of eight on the the first stage of Saturn I (S-I stage) and Saturn IB (S-IB stage).			Wikimedia
image	2007	H-1 Rocket Engine			Wikimedia
image	1960	H-1 engine characteristics: The H-1 engine was developed under the management of the Marshall Space Flight Center (MSFC).			Wikimedia
image	2004	H-1 engine major components with callouts (chart 1). The H-1 engine was used in a cluster of eight on the the first stage of Saturn I (S-I stage) and Saturn IB (S-IB stage).			Wikimedia
image	2004	H-1 rocket engine			Wikimedia
image		H-1 rocket engine diagram			Wikimedia
image		H-1 rocket engine diagram image			Wikimedia
image	2012	H-1 turbopump			Wikimedia
image	2012	H-1 turbopump 3			Wikimedia
image	1960	Inside H-1 engine			Wikimedia
image	1963	In this photograph, the single H-1 engine was test-fired at Canoga Park, California. Initial development of testing for the H-1 engine took place in the engineering facilities at Rocketdyne's main plant in Canoga Park, California.			Wikimedia
image	2009	Moteur-H1-Saturn-I-P1010677			Wikimedia
image		Outside H-1 engine			Wikimedia
image		Propulsion and Structural Test Facility			Wikimedia
image		Saturn I test article			Wikimedia
image		S-I rocket stage			Wikimedia
image	1959	The H-1 engines for the Saturn I vehicle in the alignment fixture. A cluster of eight H-1 engines were used to thrust the first stage of the Saturn I launch vehicle.			Wikimedia
image	1967	This image depicts a firing of a single H-1 engine at the Marshall Space Flight Center’s (MSFC’s) Power Plant test stand.			Wikimedia
image	1960	Workers at the Michoud Assembly Facility near New Orleans, Louisiana install the H-1 engines into the S-IB stage, the Saturn IB launch vehicle's first stage.			Wikimedia
image	1967	Workers at the Michoud Assembly Facility (MAF) near New Orleans, Louisiana, install the last engine on the S-IB stage.			Wikimedia

Individual site searches

Google custom search of specialist sites

Google custom search of general sites